--- /dev/null
+#!/bin/bash
+#
+# check_nrdp.sh
+#
+# Copyright (c) 2010-2017 - Nagios Enterprises, LLC.
+# Written by: Scott Wilkerson (nagios@nagios.org)
+#
+# 2017-09-25 Troy Lea aka BOX293
+# - Fixed script not working with arguments when run as a cron job
+# or if being used as a nagios command like obsessive compulsive.
+# ... "if [ ! -t 0 ]" was the reason why.
+# 2017-12-08 Jørgen van der Meulen (Conclusion Xforce)
+# - Fixed typo in NRDP abbreviation
+
+
+PROGNAME=$(basename $0)
+RELEASE="Revision 0.6.1"
+
+print_release() {
+ echo "$RELEASE"
+}
+
+print_usage() {
+ echo ""
+ echo "$PROGNAME $RELEASE - Send NRDP script for Nagios"
+ echo ""
+ echo "Usage: send_nrdp.sh -u URL -t token [options]"
+ echo ""
+ echo "Usage: $PROGNAME -h display help"
+ echo ""
+}
+
+print_help() {
+ print_usage
+ echo ""
+ echo "This script is used to send NRDP data to a Nagios server"
+ echo ""
+ echo "Required:"
+ echo " -u"," URL of NRDP server. Usually http://<IP_ADDRESS>/nrdp/"
+ echo " -t"," Shared token. Must be the same token set in NRDP Server"
+ echo ""
+ echo "Options:"
+ echo " Single Check:"
+ echo " -H host name"
+ echo " -s service name"
+ echo " -S State"
+ echo " -o output"
+ echo ""
+ echo " STDIN:"
+ echo " [-d delimiter] (default -d \"\\t\")"
+ echo " With only the required parameters $PROGNAME is capable of"
+ echo " processing data piped to it either from a file or other"
+ echo " process. By default, we use \t as the delimiter however this"
+ echo " may be specified with the -d option data should be in the"
+ echo " following formats one entry per line."
+ echo " For Host checks:"
+ echo " hostname State output"
+ echo " For Service checks"
+ echo " hostname servicename State output"
+ echo ""
+ echo " File:"
+ echo " -f /full/path/to/file"
+ echo " This file will be sent to the NRDP server specified in -u"
+ echo " The file should be an XML file in the following format"
+ echo " ##################################################"
+ echo ""
+ echo " <?xml version='1.0'?>"
+ echo " <checkresults>"
+ echo " <checkresult type=\"host\" checktype=\"1\">"
+ echo " <hostname>YOUR_HOSTNAME</hostname>"
+ echo " <state>0</state>"
+ echo " <output>OK|perfdata=1.00;5;10;0</output>"
+ echo " </checkresult>"
+ echo " <checkresult type=\"service\" checktype=\"1\">"
+ echo " <hostname>YOUR_HOSTNAME</hostname>"
+ echo " <servicename>YOUR_SERVICENAME</servicename>"
+ echo " <state>0</state>"
+ echo " <output>OK|perfdata=1.00;5;10;0</output>"
+ echo " </checkresult>"
+ echo " </checkresults>"
+ echo " ##################################################"
+ echo ""
+ echo " Directory:"
+ echo " -D /path/to/temp/dir"
+ echo " This is a directory that contains XML files in the format"
+ echo " above. Additionally, if the -d flag is specified, $PROGNAME"
+ echo " will create temp files here if the server could not be reached."
+ echo " On additional calls with the same -D path, if a connection to"
+ echo " the server is successful, all temp files will be sent."
+ exit 0
+}
+
+send_data() {
+ pdata="token=$token&cmd=submitcheck"
+ if [ $file ]; then
+ fdata="--data-urlencode XMLDATA@$file"
+ rslt=`curl -f --silent --insecure -d "$pdata" $fdata "$url/"`
+ else
+ pdata="$pdata&XMLDATA=$1"
+ rslt=`curl -f --silent --insecure -d "$pdata" "$url/"`
+ fi
+
+ ret=$?
+
+ status=`echo $rslt | sed -n 's|.*<status>\(.*\)</status>.*|\1|p'`
+ message=`echo $rslt | sed -n 's|.*<message>\(.*\)</message>.*|\1|p'`
+ if [ $ret != 0 ];then
+ echo "ERROR: could not connect to NRDP server at $url"
+ # verify we are not processing the directory already and then write to the directory
+ if [ ! "$2" ] && [ $directory ];then
+ if [ ! -d "$directory" ];then
+ mkdir -p "$directory"
+ fi
+ # This is where we write to the tmp directory
+ echo $xml > `mktemp $directory/nrdp.XXXXXX`
+ fi
+ exit 1
+ fi
+
+ if [ "$status" != "0" ];then
+ # This means we couldn't connect to NRPD server
+ echo "ERROR: The NRDP Server said $message"
+ # verify we are not processing the directory already and then write to the directory
+ if [ ! "$2" ] && [ $directory ];then
+ if [ ! -d "$directory" ];then
+ mkdir -p "$directory"
+ fi
+ # This is where we write to the tmp directory
+ echo $xml > `mktemp $directory/nrdp.XXXXXX`
+ fi
+
+ exit 2
+ fi
+
+ # If this was a directory call and was successful, remove the file
+ if [ $2 ] && [ "$status" == "0" ];then
+ rm -f "$2"
+ fi
+
+ # If we weren't successful error
+ if [ $ret != 0 ];then
+ echo "exited with error "$ret
+ exit $ret
+ fi
+}
+
+while getopts "u:t:H:s:S:o:f:d:c:D:hv" option
+do
+ case $option in
+ u) url=$OPTARG ;;
+ t) token=$OPTARG ;;
+ H) host=$OPTARG ;;
+ s) service=$OPTARG ;;
+ S) State=$OPTARG ;;
+ o) output=$OPTARG ;;
+ f) file=$OPTARG ;;
+ d) delim=$OPTARG ;;
+ c) checktype=$OPTARG ;;
+ D) directory=$OPTARG ;;
+ h) print_help 0;;
+ v) print_release
+ exit 0 ;;
+ esac
+done
+
+if [ ! $checktype ]; then
+ checktype=1
+fi
+if [ ! $delim ]; then
+ delim=`echo -e "\t"`
+fi
+
+if [ "x$url" == "x" -o "x$token" == "x" ]
+then
+ echo "Usage: send_nrdp -u url -t token"
+ exit 1
+fi
+# detecting curl
+if [[ `which curl` =~ "/curl" ]]
+ then curl=1;
+fi
+
+if [[ ! $curl ]];
+then
+ echo "Either curl or wget are required to run $PROGNAME"
+ exit 1
+fi
+
+checkcount=0
+
+if [ $host ]; then
+ xml=""
+ # we are not getting piped results
+ if [ "$host" == "" ] || [ "$State" == "" ]; then
+ echo "You must provide a host -H and State -S"
+ exit 2
+ fi
+ if [ "$service" != "" ]; then
+ xml="$xml<checkresult type='service' checktype='$checktype'><servicename>$service</servicename>"
+ else
+ xml="$xml<checkresult type='host' checktype='$checktype'>"
+ fi
+
+ # urlencode XML special chars
+ output=${output//&/%26}
+ output=${output//</%3C}
+ output=${output//>/%3E}
+
+ xml="$xml<hostname>$host</hostname><state>$State</state><output><![CDATA["$output"]]></output></checkresult>"
+ checkcount=1
+fi
+
+ # If only url and token have been provided then it is assumed that data is being piped
+########################
+if [[ ! $host && ! $State && ! $file && ! $directory ]]; then
+ xml=""
+ # we know we are being piped results
+ IFS=$delim
+
+ while read -r line ; do
+ arr=($line)
+ if [ ${#arr[@]} != 0 ];then
+ if [[ ${#arr[@]} < 3 ]] || [[ ${#arr[@]} > 4 ]];then
+ echo "ERROR: STDIN must be either 3 or 4 fields long, I found "${#arr[@]}
+ else
+ if [ ${#arr[@]} == 4 ]; then
+ xml="$xml<checkresult type='service' checktype='$checktype'>
+ <servicename>${arr[1]}</servicename>
+ <hostname>${arr[0]}</hostname>
+ <state>${arr[2]}</state>
+ <output>${arr[3]}</output>"
+ else
+ xml="$xml<checkresult type='host' checktype='$checktype'>
+ <hostname>${arr[0]}</hostname>
+ <state>${arr[1]}</state>
+ <output>${arr[2]}</output>"
+ fi
+
+ xml="$xml</checkresult>"
+ checkcount=$[checkcount+1]
+ fi
+ fi
+ done
+ IFS=" "
+fi
+
+if [ $file ]; then
+ xml=`cat $file`
+ send_data "$xml"
+fi
+
+if [ $directory ]; then
+ #echo "Processing directory..."
+ for f in `ls $directory`
+ do
+ #echo "Processing $f file..."
+ # take action on each file. $f store current file name
+ xml=`cat $directory/$f`
+ send_data "$xml" "$directory/$f"
+ done
+fi
+
+if [ "x$file" == "x" ] && [ "x$directory" == "x" ]; then
+ xml="<?xml version='1.0'?><checkresults>$xml</checkresults>"
+ send_data "$xml"
+ echo "Sent $checkcount checks to $url"
+fi
projects / perso / Immae / Config / Nix.git / blobdiff