/**
* Hypertext Transfer Protocol (HTTP) response status codes.
* @see {@link https://en.wikipedia.org/wiki/List_of_HTTP_status_codes}
*
* WebDAV and other codes useless with regards to PeerTube are not listed.
*/
export enum HttpStatusCode {
/**
* Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.2.1
*
* The server has received the request headers and the client should proceed to send the request body
* (in the case of a request for which a body needs to be sent; for example, a POST request).
* Sending a large request body to a server after a request has been rejected for inappropriate headers would be inefficient.
* To have a server check the request's headers, a client must send Expect: 100-continue as a header in its initial request
* and receive a 100 Continue status code in response before sending the body. The response 417 Expectation Failed indicates
* the request should not be continued.
*/
CONTINUE_100 = 100,
/**
* Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.2.2
*
* This code is sent in response to an Upgrade request header by the client, and indicates the protocol the server is switching too.
*/
SWITCHING_PROTOCOLS_101 = 101,
/**
* Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.3.1
*
* Standard response for successful HTTP requests. The actual response will depend on the request method used:
* GET: The resource has been fetched and is transmitted in the message body.
* HEAD: The entity headers are in the message body.
* POST: The resource describing the result of the action is transmitted in the message body.
* TRACE: The message body contains the request message as received by the server
*/
OK_200 = 200,
/**
* Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.3.2
*
* The request has been fulfilled, resulting in the creation of a new resource, typically after a PUT.
*/
CREATED_201 = 201,
/**
* The request has been accepted for processing, but the processing has not been completed.
* The request might or might not be eventually acted upon, and may be disallowed when processing occurs.
*/
ACCEPTED_202 = 202,
/**
* Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.3.5
*
* There is no content to send for this request, but the headers may be useful.
* The user-agent may update its cached headers for this resource with the new ones.
*/
NO_CONTENT_204 = 204,
/**
* The server successfully processed the request, but is not returning any content.
* Unlike a 204 response, this response requires that the requester reset the document view.
*/
RESET_CONTENT_205 = 205,
/**
* The server is delivering only part of the resource (byte serving) due to a range header sent by the client.
* The range header is used by HTTP clients to enable resuming of interrupted downloads,
* or split a download into multiple simultaneous streams.
*/
PARTIAL_CONTENT_206 = 206,
/**
* Indicates multiple options for the resource from which the client may choose (via agent-driven content negotiation).
* For example, this code could be used to present multiple video format options,
* to list files with different filename extensions, or to suggest word-sense disambiguation.
*/
MULTIPLE_CHOICES_300 = 300,
/**
* This and all future requests should be directed to the given URI.
*/
MOVED_PERMANENTLY_301 = 301,
/**
* This is an example of industry practice contradicting the standard.
* The HTTP/1.0 specification (RFC 1945) required the client to perform a temporary redirect
* (the original describing phrase was "Moved Temporarily"), but popular browsers implemented 302
* with the functionality of a 303 See Other. Therefore, HTTP/1.1 added status codes 303 and 307
* to distinguish between the two behaviours. However, some Web applications and frameworks
* use the 302 status code as if it were the 303.
*/
FOUND_302 = 302,
/**
* SINCE HTTP/1.1
* The response to the request can be found under another URI using a GET method.
* When received in response to a POST (or PUT/DELETE), the client should presume that
* the server has received the data and should issue a redirect with a separate GET message.
*/
SEE_OTHER_303 = 303,
/**
* Official Documentation @ https://tools.ietf.org/html/rfc7232#section-4.1
*
* Indicates that the resource has not been modified since the version specified by the request headers
* `If-Modified-Since` or `If-None-Match`.
* In such case, there is no need to retransmit the resource since the client still has a previously-downloaded copy.
*/
NOT_MODIFIED_304 = 304,
/**
* SINCE HTTP/1.1
* In this case, the request should be repeated with another URI; however, future requests should still use the original URI.
* In contrast to how 302 was historically implemented, the request method is not allowed to be changed when reissuing the
* original request.
* For example, a POST request should be repeated using another POST request.
*/
TEMPORARY_REDIRECT_307 = 307,
/**
* The request and all future requests should be repeated using another URI.
* 307 and 308 parallel the behaviors of 302 and 301, but do not allow the HTTP method to change.
* So, for example, submitting a form to a permanently redirected resource may continue smoothly.
*/
PERMANENT_REDIRECT_308 = 308,
/**
* The server cannot or will not process the request due to an apparent client error
* (e.g., malformed request syntax, too large size, invalid request message framing, or deceptive request routing).
*/
BAD_REQUEST_400 = 400,
/**
* Official Documentation @ https://tools.ietf.org/html/rfc7235#section-3.1
*
* Similar to 403 Forbidden, but specifically for use when authentication is required and has failed or has not yet
* been provided. The response must include a `WWW-Authenticate` header field containing a challenge applicable to the
* requested resource. See Basic access authentication and Digest access authentication. 401 semantically means
* "unauthenticated",i.e. the user does not have the necessary credentials.
*/
UNAUTHORIZED_401 = 401,
/**
* Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.5.2
*
* Reserved for future use. The original intention was that this code might be used as part of some form of digital
* cash or micro payment scheme, but that has not happened, and this code is not usually used.
* Google Developers API uses this status if a particular developer has exceeded the daily limit on requests.
*/
PAYMENT_REQUIRED_402 = 402,
/**
* Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.5.3
*
* The client does not have access rights to the content, i.e. they are unauthorized, so server is rejecting to
* give proper response. Unlike 401, the client's identity is known to the server.
*/
FORBIDDEN_403 = 403,
/**
* Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.6.2
*
* The requested resource could not be found but may be available in the future.
* Subsequent requests by the client are permissible.
*/
NOT_FOUND_404 = 404,
/**
* Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.5.5
*
* A request method is not supported for the requested resource;
* for example, a GET request on a form that requires data to be presented via POST, or a PUT request on a read-only resource.
*/
METHOD_NOT_ALLOWED_405 = 405,
/**
* The requested resource is capable of generating only content not acceptable according to the Accept headers sent in the request.
*/
NOT_ACCEPTABLE_406 = 406,
/**
* Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.5.7
*
* This response is sent on an idle connection by some servers, even without any previous request by the client.
* It means that the server would like to shut down this unused connection. This response is used much more since
* some browsers, like Chrome, Firefox 27+, or IE9, use HTTP pre-connection mechanisms to speed up surfing. Also
* note that some servers merely shut down the connection without sending this message.
*
* @
*/
REQUEST_TIMEOUT_408 = 408,
/**
* Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.5.8
*
* Indicates that the request could not be processed because of conflict in the request,
* such as an edit conflict between multiple simultaneous updates.
*
* @see HttpStatusCode.UNPROCESSABLE_ENTITY_422 to denote a disabled feature
*/
CONFLICT_409 = 409,
/**
* Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.5.9
*
* Indicates that the resource requested is no longer available and will not be available again.
* This should be used when a resource has been intentionally removed and the resource should be purged.
* Upon receiving a 410 status code, the client should not request the resource in the future.
* Clients such as search engines should remove the resource from their indices.
* Most use cases do not require clients and search engines to purge the resource, and a "404 Not Found" may be used instead.
*/
GONE_410 = 410,
/**
* The request did not specify the length of its content, which is required by the requested resource.
*/
LENGTH_REQUIRED_411 = 411,
/**
* The server does not meet one of the preconditions that the requester put on the request.
*/
PRECONDITION_FAILED_412 = 412,
/**
* Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.5.11
*
* The request is larger than the server is willing or able to process ; the server might close the connection
* or return an Retry-After header field.
* Previously called "Request Entity Too Large".
*/
PAYLOAD_TOO_LARGE_413 = 413,
/**
* The URI provided was too long for the server to process. Often the result of too much data being encoded as a
* query-string of a GET request, in which case it should be converted to a POST request.
* Called "Request-URI Too Long" previously.
*/
URI_TOO_LONG_414 = 414,
/**
* Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.5.13
*
* The request entity has a media type which the server or resource does not support.
* For example, the client uploads an image as image/svg+xml, but the server requires that images use a different format.
*/
UNSUPPORTED_MEDIA_TYPE_415 = 415,
/**
* The client has asked for a portion of the file (byte serving), but the server cannot supply that portion.
* For example, if the client asked for a part of the file that lies beyond the end of the file.
* Called "Requested Range Not Satisfiable" previously.
*/
RANGE_NOT_SATISFIABLE_416 = 416,
/**
* The server cannot meet the requirements of the `Expect` request-header field.
*/
EXPECTATION_FAILED_417 = 417,
/**
* Official Documentation @ https://tools.ietf.org/html/rfc2324
*
* This code was defined in 1998 as one of the traditional IETF April Fools' jokes, in RFC 2324, Hyper Text Coffee Pot Control Protocol,
* and is not expected to be implemented by actual HTTP servers. The RFC specifies this code should be returned by
* teapots requested to brew coffee. This HTTP status is used as an Easter egg in some websites, including PeerTube instances ;-).
*/
I_AM_A_TEAPOT_418 = 418,
/**
* Official Documentation @ https://tools.ietf.org/html/rfc2518#section-10.3
*
* The request was well-formed but was unable to be followed due to semantic errors.
* The server understands the content type of the request entity (hence a 415 (Unsupported Media Type) status code is inappropriate),
* and the syntax of the request entity is correct (thus a 400 (Bad Request) status code is inappropriate) but was unable to process
* the contained instructions. For example, this error condition may occur if an JSON request body contains well-formed (i.e.,
* syntactically correct), but semantically erroneous, JSON instructions.
*
* Can also be used to denote disabled features (akin to disabled syntax).
*
* @see HttpStatusCode.UNSUPPORTED_MEDIA_TYPE_415 if the `Content-Type` was not supported.
* @see HttpStatusCode.BAD_REQUEST_400 if the request was not parsable (broken JSON, XML)
*/
UNPROCESSABLE_ENTITY_422 = 422,
/**
* Official Documentation @ https://tools.ietf.org/html/rfc4918#section-11.3
*
* The resource that is being accessed is locked. WebDAV-specific but used by some HTTP services.
*
* @deprecated use `If-Match` / `If-None-Match` instead
* @see {@link https://evertpot.com/http/423-locked}
*/
LOCKED_423 = 423,
/**
* Official Documentation @ https://tools.ietf.org/html/rfc6585#section-4
*
* The user has sent too many requests in a given amount of time. Intended for use with rate-limiting schemes.
*/
TOO_MANY_REQUESTS_429 = 429,
/**
* Official Documentation @ https://tools.ietf.org/html/rfc6585#section-5
*
* The server is unwilling to process the request because either an individual header field,
* or all the header fields collectively, are too large.
*/
REQUEST_HEADER_FIELDS_TOO_LARGE_431 = 431,
/**
* Official Documentation @ https://tools.ietf.org/html/rfc7725
*
* A server operator has received a legal demand to deny access to a resource or to a set of resources
* that includes the requested resource. The code 451 was chosen as a reference to the novel Fahrenheit 451.
*/
UNAVAILABLE_FOR_LEGAL_REASONS_451 = 451,
/**
* A generic error message, given when an unexpected condition was encountered and no more specific message is suitable.
*/
INTERNAL_SERVER_ERROR_500 = 500,
/**
* Official Documentation @ https://tools.ietf.org/html/rfc7231#section-6.6.2
*
* The server either does not recognize the request method, or it lacks the ability to fulfill the request.
* Usually this implies future availability (e.g., a new feature of a web-service API).
*/
NOT_IMPLEMENTED_501 = 501,
/**
* The server was acting as a gateway or proxy and received an invalid response from the upstream server.
*/
BAD_GATEWAY_502 = 502,
/**
* The server is currently unavailable (because it is overloaded or down for maintenance).
* Generally, this is a temporary state.
*/
SERVICE_UNAVAILABLE_503 = 503,
/**
* The server was acting as a gateway or proxy and did not receive a timely response from the upstream server.
*/
GATEWAY_TIMEOUT_504 = 504,
/**
* The server does not support the HTTP protocol version used in the request
*/
HTTP_VERSION_NOT_SUPPORTED_505 = 505,
/**
* Official Documentation @ https://tools.ietf.org/html/rfc2518#section-10.6
*
* The 507 (Insufficient Storage) status code means the method could not be performed on the resource because the
* server is unable to store the representation needed to successfully complete the request. This condition is
* considered to be temporary. If the request which received this status code was the result of a user action,
* the request MUST NOT be repeated until it is requested by a separate user action.
*
* @see HttpStatusCode.PAYLOAD_TOO_LARGE_413 for quota errors
*/
INSUFFICIENT_STORAGE_507 = 507,
}
