Upgrade to 0.12

[github/fretlink/terraform-provider-statuscake.git] / vendor / google.golang.org / grpc / rpc_util.go

/*
 *
 * Copyright 2014 gRPC authors.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *
 */

package grpc

import (
        "bytes"
        "compress/gzip"
        "context"
        "encoding/binary"
        "fmt"
        "io"
        "io/ioutil"
        "math"
        "net/url"
        "strings"
        "sync"
        "time"

        "google.golang.org/grpc/codes"
        "google.golang.org/grpc/credentials"
        "google.golang.org/grpc/encoding"
        "google.golang.org/grpc/encoding/proto"
        "google.golang.org/grpc/internal/transport"
        "google.golang.org/grpc/metadata"
        "google.golang.org/grpc/peer"
        "google.golang.org/grpc/stats"
        "google.golang.org/grpc/status"
)

// Compressor defines the interface gRPC uses to compress a message.
//
// Deprecated: use package encoding.
type Compressor interface {
        // Do compresses p into w.
        Do(w io.Writer, p []byte) error
        // Type returns the compression algorithm the Compressor uses.
        Type() string
}

type gzipCompressor struct {
        pool sync.Pool
}

// NewGZIPCompressor creates a Compressor based on GZIP.
//
// Deprecated: use package encoding/gzip.
func NewGZIPCompressor() Compressor {
        c, _ := NewGZIPCompressorWithLevel(gzip.DefaultCompression)
        return c
}

// NewGZIPCompressorWithLevel is like NewGZIPCompressor but specifies the gzip compression level instead
// of assuming DefaultCompression.
//
// The error returned will be nil if the level is valid.
//
// Deprecated: use package encoding/gzip.
func NewGZIPCompressorWithLevel(level int) (Compressor, error) {
        if level < gzip.DefaultCompression || level > gzip.BestCompression {
                return nil, fmt.Errorf("grpc: invalid compression level: %d", level)
        }
        return &gzipCompressor{
                pool: sync.Pool{
                        New: func() interface{} {
                                w, err := gzip.NewWriterLevel(ioutil.Discard, level)
                                if err != nil {
                                        panic(err)
                                }
                                return w
                        },
                },
        }, nil
}

func (c *gzipCompressor) Do(w io.Writer, p []byte) error {
        z := c.pool.Get().(*gzip.Writer)
        defer c.pool.Put(z)
        z.Reset(w)
        if _, err := z.Write(p); err != nil {
                return err
        }
        return z.Close()
}

func (c *gzipCompressor) Type() string {
        return "gzip"
}

// Decompressor defines the interface gRPC uses to decompress a message.
//
// Deprecated: use package encoding.
type Decompressor interface {
        // Do reads the data from r and uncompress them.
        Do(r io.Reader) ([]byte, error)
        // Type returns the compression algorithm the Decompressor uses.
        Type() string
}

type gzipDecompressor struct {
        pool sync.Pool
}

// NewGZIPDecompressor creates a Decompressor based on GZIP.
//
// Deprecated: use package encoding/gzip.
func NewGZIPDecompressor() Decompressor {
        return &gzipDecompressor{}
}

func (d *gzipDecompressor) Do(r io.Reader) ([]byte, error) {
        var z *gzip.Reader
        switch maybeZ := d.pool.Get().(type) {
        case nil:
                newZ, err := gzip.NewReader(r)
                if err != nil {
                        return nil, err
                }
                z = newZ
        case *gzip.Reader:
                z = maybeZ
                if err := z.Reset(r); err != nil {
                        d.pool.Put(z)
                        return nil, err
                }
        }

        defer func() {
                z.Close()
                d.pool.Put(z)
        }()
        return ioutil.ReadAll(z)
}

func (d *gzipDecompressor) Type() string {
        return "gzip"
}

// callInfo contains all related configuration and information about an RPC.
type callInfo struct {
        compressorType        string
        failFast              bool
        stream                ClientStream
        maxReceiveMessageSize *int
        maxSendMessageSize    *int
        creds                 credentials.PerRPCCredentials
        contentSubtype        string
        codec                 baseCodec
        maxRetryRPCBufferSize int
}

func defaultCallInfo() *callInfo {
        return &callInfo{
                failFast:              true,
                maxRetryRPCBufferSize: 256 * 1024, // 256KB
        }
}

// CallOption configures a Call before it starts or extracts information from
// a Call after it completes.
type CallOption interface {
        // before is called before the call is sent to any server.  If before
        // returns a non-nil error, the RPC fails with that error.
        before(*callInfo) error

        // after is called after the call has completed.  after cannot return an
        // error, so any failures should be reported via output parameters.
        after(*callInfo)
}

// EmptyCallOption does not alter the Call configuration.
// It can be embedded in another structure to carry satellite data for use
// by interceptors.
type EmptyCallOption struct{}

func (EmptyCallOption) before(*callInfo) error { return nil }
func (EmptyCallOption) after(*callInfo)        {}

// Header returns a CallOptions that retrieves the header metadata
// for a unary RPC.
func Header(md *metadata.MD) CallOption {
        return HeaderCallOption{HeaderAddr: md}
}

// HeaderCallOption is a CallOption for collecting response header metadata.
// The metadata field will be populated *after* the RPC completes.
// This is an EXPERIMENTAL API.
type HeaderCallOption struct {
        HeaderAddr *metadata.MD
}

func (o HeaderCallOption) before(c *callInfo) error { return nil }
func (o HeaderCallOption) after(c *callInfo) {
        if c.stream != nil {
                *o.HeaderAddr, _ = c.stream.Header()
        }
}

// Trailer returns a CallOptions that retrieves the trailer metadata
// for a unary RPC.
func Trailer(md *metadata.MD) CallOption {
        return TrailerCallOption{TrailerAddr: md}
}

// TrailerCallOption is a CallOption for collecting response trailer metadata.
// The metadata field will be populated *after* the RPC completes.
// This is an EXPERIMENTAL API.
type TrailerCallOption struct {
        TrailerAddr *metadata.MD
}

func (o TrailerCallOption) before(c *callInfo) error { return nil }
func (o TrailerCallOption) after(c *callInfo) {
        if c.stream != nil {
                *o.TrailerAddr = c.stream.Trailer()
        }
}

// Peer returns a CallOption that retrieves peer information for a unary RPC.
// The peer field will be populated *after* the RPC completes.
func Peer(p *peer.Peer) CallOption {
        return PeerCallOption{PeerAddr: p}
}

// PeerCallOption is a CallOption for collecting the identity of the remote
// peer. The peer field will be populated *after* the RPC completes.
// This is an EXPERIMENTAL API.
type PeerCallOption struct {
        PeerAddr *peer.Peer
}

func (o PeerCallOption) before(c *callInfo) error { return nil }
func (o PeerCallOption) after(c *callInfo) {
        if c.stream != nil {
                if x, ok := peer.FromContext(c.stream.Context()); ok {
                        *o.PeerAddr = *x
                }
        }
}

// WaitForReady configures the action to take when an RPC is attempted on broken
// connections or unreachable servers. If waitForReady is false, the RPC will fail
// immediately. Otherwise, the RPC client will block the call until a
// connection is available (or the call is canceled or times out) and will
// retry the call if it fails due to a transient error.  gRPC will not retry if
// data was written to the wire unless the server indicates it did not process
// the data.  Please refer to
// https://github.com/grpc/grpc/blob/master/doc/wait-for-ready.md.
//
// By default, RPCs don't "wait for ready".
func WaitForReady(waitForReady bool) CallOption {
        return FailFastCallOption{FailFast: !waitForReady}
}

// FailFast is the opposite of WaitForReady.
//
// Deprecated: use WaitForReady.
func FailFast(failFast bool) CallOption {
        return FailFastCallOption{FailFast: failFast}
}

// FailFastCallOption is a CallOption for indicating whether an RPC should fail
// fast or not.
// This is an EXPERIMENTAL API.
type FailFastCallOption struct {
        FailFast bool
}

func (o FailFastCallOption) before(c *callInfo) error {
        c.failFast = o.FailFast
        return nil
}
func (o FailFastCallOption) after(c *callInfo) {}

// MaxCallRecvMsgSize returns a CallOption which sets the maximum message size the client can receive.
func MaxCallRecvMsgSize(s int) CallOption {
        return MaxRecvMsgSizeCallOption{MaxRecvMsgSize: s}
}

// MaxRecvMsgSizeCallOption is a CallOption that indicates the maximum message
// size the client can receive.
// This is an EXPERIMENTAL API.
type MaxRecvMsgSizeCallOption struct {
        MaxRecvMsgSize int
}

func (o MaxRecvMsgSizeCallOption) before(c *callInfo) error {
        c.maxReceiveMessageSize = &o.MaxRecvMsgSize
        return nil
}
func (o MaxRecvMsgSizeCallOption) after(c *callInfo) {}

// MaxCallSendMsgSize returns a CallOption which sets the maximum message size the client can send.
func MaxCallSendMsgSize(s int) CallOption {
        return MaxSendMsgSizeCallOption{MaxSendMsgSize: s}
}

// MaxSendMsgSizeCallOption is a CallOption that indicates the maximum message
// size the client can send.
// This is an EXPERIMENTAL API.
type MaxSendMsgSizeCallOption struct {
        MaxSendMsgSize int
}

func (o MaxSendMsgSizeCallOption) before(c *callInfo) error {
        c.maxSendMessageSize = &o.MaxSendMsgSize
        return nil
}
func (o MaxSendMsgSizeCallOption) after(c *callInfo) {}

// PerRPCCredentials returns a CallOption that sets credentials.PerRPCCredentials
// for a call.
func PerRPCCredentials(creds credentials.PerRPCCredentials) CallOption {
        return PerRPCCredsCallOption{Creds: creds}
}

// PerRPCCredsCallOption is a CallOption that indicates the per-RPC
// credentials to use for the call.
// This is an EXPERIMENTAL API.
type PerRPCCredsCallOption struct {
        Creds credentials.PerRPCCredentials
}

func (o PerRPCCredsCallOption) before(c *callInfo) error {
        c.creds = o.Creds
        return nil
}
func (o PerRPCCredsCallOption) after(c *callInfo) {}

// UseCompressor returns a CallOption which sets the compressor used when
// sending the request.  If WithCompressor is also set, UseCompressor has
// higher priority.
//
// This API is EXPERIMENTAL.
func UseCompressor(name string) CallOption {
        return CompressorCallOption{CompressorType: name}
}

// CompressorCallOption is a CallOption that indicates the compressor to use.
// This is an EXPERIMENTAL API.
type CompressorCallOption struct {
        CompressorType string
}

func (o CompressorCallOption) before(c *callInfo) error {
        c.compressorType = o.CompressorType
        return nil
}
func (o CompressorCallOption) after(c *callInfo) {}

// CallContentSubtype returns a CallOption that will set the content-subtype
// for a call. For example, if content-subtype is "json", the Content-Type over
// the wire will be "application/grpc+json". The content-subtype is converted
// to lowercase before being included in Content-Type. See Content-Type on
// https://github.com/grpc/grpc/blob/master/doc/PROTOCOL-HTTP2.md#requests for
// more details.
//
// If CallCustomCodec is not also used, the content-subtype will be used to
// look up the Codec to use in the registry controlled by RegisterCodec. See
// the documentation on RegisterCodec for details on registration. The lookup
// of content-subtype is case-insensitive. If no such Codec is found, the call
// will result in an error with code codes.Internal.
//
// If CallCustomCodec is also used, that Codec will be used for all request and
// response messages, with the content-subtype set to the given contentSubtype
// here for requests.
func CallContentSubtype(contentSubtype string) CallOption {
        return ContentSubtypeCallOption{ContentSubtype: strings.ToLower(contentSubtype)}
}

// ContentSubtypeCallOption is a CallOption that indicates the content-subtype
// used for marshaling messages.
// This is an EXPERIMENTAL API.
type ContentSubtypeCallOption struct {
        ContentSubtype string
}

func (o ContentSubtypeCallOption) before(c *callInfo) error {
        c.contentSubtype = o.ContentSubtype
        return nil
}
func (o ContentSubtypeCallOption) after(c *callInfo) {}

// CallCustomCodec returns a CallOption that will set the given Codec to be
// used for all request and response messages for a call. The result of calling
// String() will be used as the content-subtype in a case-insensitive manner.
//
// See Content-Type on
// https://github.com/grpc/grpc/blob/master/doc/PROTOCOL-HTTP2.md#requests for
// more details. Also see the documentation on RegisterCodec and
// CallContentSubtype for more details on the interaction between Codec and
// content-subtype.
//
// This function is provided for advanced users; prefer to use only
// CallContentSubtype to select a registered codec instead.
func CallCustomCodec(codec Codec) CallOption {
        return CustomCodecCallOption{Codec: codec}
}

// CustomCodecCallOption is a CallOption that indicates the codec used for
// marshaling messages.
// This is an EXPERIMENTAL API.
type CustomCodecCallOption struct {
        Codec Codec
}

func (o CustomCodecCallOption) before(c *callInfo) error {
        c.codec = o.Codec
        return nil
}
func (o CustomCodecCallOption) after(c *callInfo) {}

// MaxRetryRPCBufferSize returns a CallOption that limits the amount of memory
// used for buffering this RPC's requests for retry purposes.
//
// This API is EXPERIMENTAL.
func MaxRetryRPCBufferSize(bytes int) CallOption {
        return MaxRetryRPCBufferSizeCallOption{bytes}
}

// MaxRetryRPCBufferSizeCallOption is a CallOption indicating the amount of
// memory to be used for caching this RPC for retry purposes.
// This is an EXPERIMENTAL API.
type MaxRetryRPCBufferSizeCallOption struct {
        MaxRetryRPCBufferSize int
}

func (o MaxRetryRPCBufferSizeCallOption) before(c *callInfo) error {
        c.maxRetryRPCBufferSize = o.MaxRetryRPCBufferSize
        return nil
}
func (o MaxRetryRPCBufferSizeCallOption) after(c *callInfo) {}

// The format of the payload: compressed or not?
type payloadFormat uint8

const (
        compressionNone payloadFormat = 0 // no compression
        compressionMade payloadFormat = 1 // compressed
)

// parser reads complete gRPC messages from the underlying reader.
type parser struct {
        // r is the underlying reader.
        // See the comment on recvMsg for the permissible
        // error types.
        r io.Reader

        // The header of a gRPC message. Find more detail at
        // https://github.com/grpc/grpc/blob/master/doc/PROTOCOL-HTTP2.md
        header [5]byte
}

// recvMsg reads a complete gRPC message from the stream.
//
// It returns the message and its payload (compression/encoding)
// format. The caller owns the returned msg memory.
//
// If there is an error, possible values are:
//   * io.EOF, when no messages remain
//   * io.ErrUnexpectedEOF
//   * of type transport.ConnectionError
//   * an error from the status package
// No other error values or types must be returned, which also means
// that the underlying io.Reader must not return an incompatible
// error.
func (p *parser) recvMsg(maxReceiveMessageSize int) (pf payloadFormat, msg []byte, err error) {
        if _, err := p.r.Read(p.header[:]); err != nil {
                return 0, nil, err
        }

        pf = payloadFormat(p.header[0])
        length := binary.BigEndian.Uint32(p.header[1:])

        if length == 0 {
                return pf, nil, nil
        }
        if int64(length) > int64(maxInt) {
                return 0, nil, status.Errorf(codes.ResourceExhausted, "grpc: received message larger than max length allowed on current machine (%d vs. %d)", length, maxInt)
        }
        if int(length) > maxReceiveMessageSize {
                return 0, nil, status.Errorf(codes.ResourceExhausted, "grpc: received message larger than max (%d vs. %d)", length, maxReceiveMessageSize)
        }
        // TODO(bradfitz,zhaoq): garbage. reuse buffer after proto decoding instead
        // of making it for each message:
        msg = make([]byte, int(length))
        if _, err := p.r.Read(msg); err != nil {
                if err == io.EOF {
                        err = io.ErrUnexpectedEOF
                }
                return 0, nil, err
        }
        return pf, msg, nil
}

// encode serializes msg and returns a buffer containing the message, or an
// error if it is too large to be transmitted by grpc.  If msg is nil, it
// generates an empty message.
func encode(c baseCodec, msg interface{}) ([]byte, error) {
        if msg == nil { // NOTE: typed nils will not be caught by this check
                return nil, nil
        }
        b, err := c.Marshal(msg)
        if err != nil {
                return nil, status.Errorf(codes.Internal, "grpc: error while marshaling: %v", err.Error())
        }
        if uint(len(b)) > math.MaxUint32 {
                return nil, status.Errorf(codes.ResourceExhausted, "grpc: message too large (%d bytes)", len(b))
        }
        return b, nil
}

// compress returns the input bytes compressed by compressor or cp.  If both
// compressors are nil, returns nil.
//
// TODO(dfawley): eliminate cp parameter by wrapping Compressor in an encoding.Compressor.
func compress(in []byte, cp Compressor, compressor encoding.Compressor) ([]byte, error) {
        if compressor == nil && cp == nil {
                return nil, nil
        }
        wrapErr := func(err error) error {
                return status.Errorf(codes.Internal, "grpc: error while compressing: %v", err.Error())
        }
        cbuf := &bytes.Buffer{}
        if compressor != nil {
                z, err := compressor.Compress(cbuf)
                if err != nil {
                        return nil, wrapErr(err)
                }
                if _, err := z.Write(in); err != nil {
                        return nil, wrapErr(err)
                }
                if err := z.Close(); err != nil {
                        return nil, wrapErr(err)
                }
        } else {
                if err := cp.Do(cbuf, in); err != nil {
                        return nil, wrapErr(err)
                }
        }
        return cbuf.Bytes(), nil
}

const (
        payloadLen = 1
        sizeLen    = 4
        headerLen  = payloadLen + sizeLen
)

// msgHeader returns a 5-byte header for the message being transmitted and the
// payload, which is compData if non-nil or data otherwise.
func msgHeader(data, compData []byte) (hdr []byte, payload []byte) {
        hdr = make([]byte, headerLen)
        if compData != nil {
                hdr[0] = byte(compressionMade)
                data = compData
        } else {
                hdr[0] = byte(compressionNone)
        }

        // Write length of payload into buf
        binary.BigEndian.PutUint32(hdr[payloadLen:], uint32(len(data)))
        return hdr, data
}

func outPayload(client bool, msg interface{}, data, payload []byte, t time.Time) *stats.OutPayload {
        return &stats.OutPayload{
                Client:     client,
                Payload:    msg,
                Data:       data,
                Length:     len(data),
                WireLength: len(payload) + headerLen,
                SentTime:   t,
        }
}

func checkRecvPayload(pf payloadFormat, recvCompress string, haveCompressor bool) *status.Status {
        switch pf {
        case compressionNone:
        case compressionMade:
                if recvCompress == "" || recvCompress == encoding.Identity {
                        return status.New(codes.Internal, "grpc: compressed flag set with identity or empty encoding")
                }
                if !haveCompressor {
                        return status.Newf(codes.Unimplemented, "grpc: Decompressor is not installed for grpc-encoding %q", recvCompress)
                }
        default:
                return status.Newf(codes.Internal, "grpc: received unexpected payload format %d", pf)
        }
        return nil
}

type payloadInfo struct {
        wireLength        int // The compressed length got from wire.
        uncompressedBytes []byte
}

func recvAndDecompress(p *parser, s *transport.Stream, dc Decompressor, maxReceiveMessageSize int, payInfo *payloadInfo, compressor encoding.Compressor) ([]byte, error) {
        pf, d, err := p.recvMsg(maxReceiveMessageSize)
        if err != nil {
                return nil, err
        }
        if payInfo != nil {
                payInfo.wireLength = len(d)
        }

        if st := checkRecvPayload(pf, s.RecvCompress(), compressor != nil || dc != nil); st != nil {
                return nil, st.Err()
        }

        if pf == compressionMade {
                // To match legacy behavior, if the decompressor is set by WithDecompressor or RPCDecompressor,
                // use this decompressor as the default.
                if dc != nil {
                        d, err = dc.Do(bytes.NewReader(d))
                        if err != nil {
                                return nil, status.Errorf(codes.Internal, "grpc: failed to decompress the received message %v", err)
                        }
                } else {
                        dcReader, err := compressor.Decompress(bytes.NewReader(d))
                        if err != nil {
                                return nil, status.Errorf(codes.Internal, "grpc: failed to decompress the received message %v", err)
                        }
                        d, err = ioutil.ReadAll(dcReader)
                        if err != nil {
                                return nil, status.Errorf(codes.Internal, "grpc: failed to decompress the received message %v", err)
                        }
                }
        }
        if len(d) > maxReceiveMessageSize {
                // TODO: Revisit the error code. Currently keep it consistent with java
                // implementation.
                return nil, status.Errorf(codes.ResourceExhausted, "grpc: received message larger than max (%d vs. %d)", len(d), maxReceiveMessageSize)
        }
        return d, nil
}

// For the two compressor parameters, both should not be set, but if they are,
// dc takes precedence over compressor.
// TODO(dfawley): wrap the old compressor/decompressor using the new API?
func recv(p *parser, c baseCodec, s *transport.Stream, dc Decompressor, m interface{}, maxReceiveMessageSize int, payInfo *payloadInfo, compressor encoding.Compressor) error {
        d, err := recvAndDecompress(p, s, dc, maxReceiveMessageSize, payInfo, compressor)
        if err != nil {
                return err
        }
        if err := c.Unmarshal(d, m); err != nil {
                return status.Errorf(codes.Internal, "grpc: failed to unmarshal the received message %v", err)
        }
        if payInfo != nil {
                payInfo.uncompressedBytes = d
        }
        return nil
}

type rpcInfo struct {
        failfast bool
}

type rpcInfoContextKey struct{}

func newContextWithRPCInfo(ctx context.Context, failfast bool) context.Context {
        return context.WithValue(ctx, rpcInfoContextKey{}, &rpcInfo{failfast: failfast})
}

func rpcInfoFromContext(ctx context.Context) (s *rpcInfo, ok bool) {
        s, ok = ctx.Value(rpcInfoContextKey{}).(*rpcInfo)
        return
}

// Code returns the error code for err if it was produced by the rpc system.
// Otherwise, it returns codes.Unknown.
//
// Deprecated: use status.Code instead.
func Code(err error) codes.Code {
        return status.Code(err)
}

// ErrorDesc returns the error description of err if it was produced by the rpc system.
// Otherwise, it returns err.Error() or empty string when err is nil.
//
// Deprecated: use status.Convert and Message method instead.
func ErrorDesc(err error) string {
        return status.Convert(err).Message()
}

// Errorf returns an error containing an error code and a description;
// Errorf returns nil if c is OK.
//
// Deprecated: use status.Errorf instead.
func Errorf(c codes.Code, format string, a ...interface{}) error {
        return status.Errorf(c, format, a...)
}

// toRPCErr converts an error into an error from the status package.
func toRPCErr(err error) error {
        if err == nil || err == io.EOF {
                return err
        }
        if err == io.ErrUnexpectedEOF {
                return status.Error(codes.Internal, err.Error())
        }
        if _, ok := status.FromError(err); ok {
                return err
        }
        switch e := err.(type) {
        case transport.ConnectionError:
                return status.Error(codes.Unavailable, e.Desc)
        default:
                switch err {
                case context.DeadlineExceeded:
                        return status.Error(codes.DeadlineExceeded, err.Error())
                case context.Canceled:
                        return status.Error(codes.Canceled, err.Error())
                }
        }
        return status.Error(codes.Unknown, err.Error())
}

// setCallInfoCodec should only be called after CallOptions have been applied.
func setCallInfoCodec(c *callInfo) error {
        if c.codec != nil {
                // codec was already set by a CallOption; use it.
                return nil
        }

        if c.contentSubtype == "" {
                // No codec specified in CallOptions; use proto by default.
                c.codec = encoding.GetCodec(proto.Name)
                return nil
        }

        // c.contentSubtype is already lowercased in CallContentSubtype
        c.codec = encoding.GetCodec(c.contentSubtype)
        if c.codec == nil {
                return status.Errorf(codes.Internal, "no codec registered for content-subtype %s", c.contentSubtype)
        }
        return nil
}

// parseDialTarget returns the network and address to pass to dialer
func parseDialTarget(target string) (net string, addr string) {
        net = "tcp"

        m1 := strings.Index(target, ":")
        m2 := strings.Index(target, ":/")

        // handle unix:addr which will fail with url.Parse
        if m1 >= 0 && m2 < 0 {
                if n := target[0:m1]; n == "unix" {
                        net = n
                        addr = target[m1+1:]
                        return net, addr
                }
        }
        if m2 >= 0 {
                t, err := url.Parse(target)
                if err != nil {
                        return net, target
                }
                scheme := t.Scheme
                addr = t.Path
                if scheme == "unix" {
                        net = scheme
                        if addr == "" {
                                addr = t.Host
                        }
                        return net, addr
                }
        }

        return net, target
}

// channelzData is used to store channelz related data for ClientConn, addrConn and Server.
// These fields cannot be embedded in the original structs (e.g. ClientConn), since to do atomic
// operation on int64 variable on 32-bit machine, user is responsible to enforce memory alignment.
// Here, by grouping those int64 fields inside a struct, we are enforcing the alignment.
type channelzData struct {
        callsStarted   int64
        callsFailed    int64
        callsSucceeded int64
        // lastCallStartedTime stores the timestamp that last call starts. It is of int64 type instead of
        // time.Time since it's more costly to atomically update time.Time variable than int64 variable.
        lastCallStartedTime int64
}

// The SupportPackageIsVersion variables are referenced from generated protocol
// buffer files to ensure compatibility with the gRPC version used.  The latest
// support package version is 5.
//
// Older versions are kept for compatibility. They may be removed if
// compatibility cannot be maintained.
//
// These constants should not be referenced from any other code.
const (
        SupportPackageIsVersion3 = true
        SupportPackageIsVersion4 = true
        SupportPackageIsVersion5 = true
)

const grpcUA = "grpc-go/" + Version